APM 2.6 2.5 2.8 LED Board TBS DISCOVERY navigation light LED with Drive module Quadcopter F330 F450 F550 S500 FPV Drone Kit aircraft Quad Quadrocopter Frame
Notes: Default Shippment Color is 2pcs Red and 2pcs Green LED light.
There are 4 color for the LED light, like red, green, blue, yellow. If you like other color, please leave a message to us when you order. We will ship the item of this color to you according to your message.
This product suitable for F330, F450, F550, S500, S550 frame rack, black sheep opposite the rack, and part of FPV rack, to solve the installation problem of the rack LED lights, LED lights using 0.5W high power Lamp beads, to ensure the penetration of light, long distance can still distinguish the nose through the LED light head position.
It is recommended that players buy a package with 5V BEC buck module, connect the battery to light the LED. Flicker control module, you can control the LED light is always bright, flashing and shut down, in the flash mode can control the flashing speed and style, the aircraft more cool, easy to identify.
In addition, specifically designed for APM flight control LED intelligent drive circuit can be used in accordance with the flight control state changes in the form of flashing lights, the drive board also with speakers, in the flight control unlock, lock, low voltage, issued a different Prompt signal.
LED can have three modes of operation:
Always bright mode: for all flight control, only need to provide 5V power supply for the LED, LED light is always bright.
Universal flash mode: for all flight control, through the control module, you can control the LED lights in the bright, off, flashing three states, in the flash mode, you can further control the flashing speed and style.
Intelligent mode: only for APM2.5 2.6 2.8 flight control, and the need to buy our shop apm intelligent driver board, LED lights will be based on the flight control of the unlock state and GPS status and power conditions, flashing or bright.
When the APM flight control is not unlocked when the corresponding two lights flashing, when unlocked, often bright; when the GPS is not positioned, the corresponding two lights flashing, when positioning, often bright.
If the flight control is not connected to the GPS, then the corresponding two lights will not light up
when the flight control power is low, the driver board buzzer issued a loud beep alarm sound.
LED lamp rated voltage: 5V
BEC buck module input voltage: 28 ~ 7V
BEC buck module output voltage: 5V
Color:2 red 2 green,2 red 2 blue,2 green 2 blue,2 yellow 2 blue optional
Quantity:4 pieces led lights
1.Always bright mode connection diagram
2.General blinking mode:four lights flashing connecion diagra
3.General blinking mode:tow lights flashing connecion diagra
4.Intelligent mode connection diagram （APM drives are not sold）
Notes: we do not sell APM drivers(APM drives need your own preparation),so you will not be able to control leds with APM flight control.
There are total of 8 kinds of dynamic mode. It will be a kind of dynamic mode by pressing one time. It is one-way loop. It can work with the middle “SPEEP” button to adjust the speed, a total of 10 levels.
It will enter the static light mode by pressing one time. The brightness will be higher by press each time. present one level at a time, one-way irreversible, a total of 10 levels. Long press can reach the brightest quickly. It can work with the middle “SPEEP” button to adjust the brightness, a total of 10 levels.
1. It will be turned on by pressing this button（SPEEP）for a short time. It will be turned off by long pressing and holding this button（SPEEP）for a long time.
2. Static / dynamic mode brightness / speed, each click this button present a level,
one-way cycle, a total of 10 levels.
Notes:The power supply input of LED must be 5V.
F450 F330 F550 S500 S550 Frame kit LED navigation lights
for quadcopter Multirotor drone kit accessories
APM2.6 2.5 2.8 LED TBS DISCOVERY navigation light BEC controller for F330 F450 F550 S500 S550 Quadcopter drone frame kit vehicle
Note : When using this LED lamp board, select 5V output, (note the position of the jumper cap)
if you choose 12V output, you will damage the LED lamp board
The default shipment with 2 red and 2 green LED.