Betafpv Beta95X Whoop Quad racing brushless Crossing machine video shooting drone for GoPro Hero6/7 rc racing Crossing drone
Please note that this product does not include GoPro cameras and batteries.
Product model: Beta95X by GoPro Hero
Weight: 85.2 grams (without GoPro Hero or battery)
Flight controller: F4 405 16A brushless flight controller and ESC V2.0 BLHeli_32
Rack: Beta95X rack
Motor: 1106 4500KV brushless motor
Propeller: 2.5-inch 3-blade propeller
Receiver options: Frsky XM+ / TBS Crossfire / Futaba / DSMX / PNP (no reception)
Camera: BETAFPV EOS 2 V2 camera
1 set * Beta95X for GoPro Hero
1 * Gopro Hero BEC board
1 * GoPro Lite camera case
1 * GH1.25 power cord (80mm 30AWG)
1 pack * mounting screws
The 95X Gopro kit is the best choice for FPV shooting. It weighs about 85.2g without GoPro Hero and battery.
Install customized EOS2 V2 camera and A01 VTX (video transmission), you can enjoy real-time FPV Video and low RF interference in flight.
The pads can be used by pilots to record via the wireless remote GoPro.
Built-in high-performance STM32F051K66 processor flight control board and adjusted BETAFPV F4 405 (BEFH), can achieve faster input signals, lower latency and higher update rate, thus providing you with more power.
Equipped with an adjustable camera mount of 0-50° for FPV Video shooting. This will be the best choice to build the smallest cinewhoop drone (can carry naked GoPro6).
Based on the Beta95X Whoop traversal machine, we designed a BEC board suitable for GoPro Hero, which can be used for video shooting on Beta95X. The wheelbase is only 100mm, without GoPro and battery, and weighs about 86.4g. With the help of 2.5-inch 3-blade propeller, 1106 motor and 16A BLHeli_32 ESC, it can successfully complete all difficult acrobatics, such as tumbling and jumping. We also provide Beta85X Gopro kit
Based on the 95X Whoop traversal machine, we designed the BEC board of this FPV community for this bare metal GoPro. This drone can carry the GoPro lite camera with you, and it can hold 106g without a battery. The use of pluggable power terminals makes it easier to insert and remove.
In order to provide an excellent combination for the FPV community, we designed the BEC board, which is perfect for naked GoPro Hero 6. Use a carbon fiber housing and pluggable terminal heads. At the same time, we have designed an adjustable camera stand of 0-50°, which can be used in different flight modes of crazy flight or slow flight.
GoPro Lite instructions
Based on the discussion of cinewhoop, we designed a BEC board and a storage case kit for NaPro GoPro Hero 6/7 to become a protective sleeve and carrier for GOPro Lite cameras. With the help of pluggable terminal heads, it can be more easily mounted on cinewhoop for FPV shooting.
So what is special about the BEC board? It is integrated with 5V@2A BEC, spare GoPro button, LED and remote recording, which solves the problem of unstable power supply and redundant FPC connection. The current BEC board is suitable for GoPro Hero 6 and Hero 7 Black.
How to set up remote recording
Pilots can start/stop recording with the switch on the wireless remote control. Need more configuration.
For example, if you use F4 12A AIO flight controller to set the same as Beta95X in the traversing machine, as shown in the figure below. The yellow cable (flight control B12 pin pad) is only used for remote recording.
We use Pinio function in Betaflight to control the recording. First, set the Pinio function of the B12 pin on the flight controller. (Betaflight cli brushed in)
resource FLASH_CS 1 NONE
resource PINIO 1 B12
set pinio_box = 40,255,255,255
Next, map a switch channel in your wireless remote control to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the wireless remote control to USER1 Pinio. The cursor in the orange area indicates that the button has been released, and the cursor in the white area indicates that it has been pressed. Therefore, the cursor is kept in the orange area by default.
Third, check if the Pinio function is working. Change the switch and move the cursor from the orange area to the white area, and finally move back to the orange area. Now you can check the LED status to see if the recording has started. Use the same process to stop recording.
If you use like the 85X Whoop drone, you will use the LED_STRIP pin (also known as the A08 pin pad) to implement the Pinio function.
resource LED_STRIP 1 NONE
resource PINIO 1 A08
set pinio_box = 40,255,255,255
Leave a Review
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
|Location||*Estimated Shipping Time|
|United States||10-20 Business days|
|Canada, Europe||10-20 Business days|
|Australia, New Zealand||10-30 Business days|
|Central & South America||15-30 Business days|
|Asia||10-20 Business days|
|Africa||15-45 Business days|
Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.