Betafpv Black Gold Knight X-Blue Belt 20A 4 Inch Speed Crossing Machine frame Carbon fiber 4 inch 4 axis aircraft rack RC drone
X-Knight 4”FPV Toothpick Machine Quad-Lightweight 4-inch toothpick crossing machine.
Have you heard of the new FAA regulations on Romote ID? Are you worried about 4-inch and 5-inch drones? This lightweight X-Knight 4”Quad weighs only 130 grams, is less than 250 grams even with a battery, and is still powerful enough like a 5-inch drone. Make your flight easier without restrictions.
Even connected to a battery, a 4-inch lightweight toothpick penetrating machine weighing less than 250g can meet the current requirements of the FAA regulations.
The assembled 4-inch frame kit uses T700 carbon material for extreme durability while maintaining a minimum weight of 25.3g.
The first carbon fiber series was fitted with a Betafpv Toothpick 20A 2-4S AIO flight controller (referred to as flight controller), which can support continuous currents up to 25A.
X-Knight is integrated with a 1505 3600KV motor to provide unmatched thrust and control execution.
Supports up to 850mAh 4S battery. It has powerful functions to do all the tricks and flips as needed.
Weight: 129.6g (excluding battery)
FC (Flight Control) & ESC (ESC): F4 2-4S AIO 20A Flight Control ESC (Integrated)
Motor: 1505 3600KV brushless motor
Paddle: HQ 4025 2-blade paddle
Camera lens: Caddx Ratel
VTX (picture transmission): A01 25-200mW 5.8G VTX (picture transmission)
Rack: X-Knight Carbon Fiber 4 Inch Rack Kit
Cover: X-Knight’s injection molding cover
Receiver options: Frsky XM + / DSMX / Futaba S-FHSS / TBS Crossfire
Flight time: 3: 30-7: 30 minutes using XT60 4S battery
F4 2-4S AIO 20A flight control ESC (integrated) is the first 20A toothpick FC (fly control) equipped with flight control ESC integrated in the first quadcopter. It can handle 20A continuous current (25A) and make it The crazy flight output in the air provides strong support while still remaining ultralight at only 6.63 grams. With a high-performance STM32F411CEU6 processor and an adjusted Betaflight MATEKF411 (MK41), it can provide more power on 4S.
1505 3600KV motor is the perfect combination of high power 4s 4 inch toothpick penetrating machine, which can easily swing up to 4 inch blades.
Combined with the 20A Toothpick F4 AIO flight controller, it will provide you with sufficient output power.
Camera and VTX (picture transmission):
Caddx Ratel is a great camera choice for night and day flight! Equipped with a high-quality 1 / 1.18 “HDR sensor that provides sensitivity up to 0.0001 lux. Its versatility is that you can switch between PAL and NTSC video and between 4: 3 and 16: 9 video formats. 8ms ultra-low power consumption.
Image sensor: 1 / 1.8-inch starlight HDR sensor
Horizontal resolution: 1200TVL
Field of view: 180 degrees
Minimum delay: 8ms
TV system: NTSC and PAL (changeable)
Picture: 16: 9 and 4: 3 (can be changed)
WDR: Super WDR (HDR)
Minimum Illumination: Starlight
Electronic shutter: PAL: 1/50 ~ 100,000; NTSC: 1/60 ~ 100,000
Signal to noise ratio:> 60dB (AGC OFF)
Video output: CVBS
Camera OSD: Separate OSD
VTX (picture transmission) specifications:
The A01 VTX board is lighter and more suitable for a cover that switches output power between 25mW and 200mW. By default, SmartAudio can be used for VTX remote control.
Output power: 25mW and 200mW (adjustable)
Includes intelligent audio functions for radio control (remote control at video receiver debugging; for example: FPV screen, VR glasses)
Frequency: 5.8GHz 6-band 37 channels
Black Gold Knight X-Blue Ribbon Carbon Fiber 4 Inch Rack Kit
Our first assembled 4-inch rack kit uses T700 carbon material for extreme durability while maintaining a minimum weight of 25.3g. It consists of an arm, a bottom plate, and a top plate, allowing you to replace damaged parts. At the same time, the top plate has countersunk screws to make the installation process easier.
Injection machine cover
The microcomputer cover specially designed for 19-20mm cameras is made of injection molding process and PE material, which is more durable than the original cover.
The 850mAh 4S battery with the male connector of the XT60 power terminal is the best choice for powering the X-Knight 4Ich Quad. The following is a list of recommended batteries.
Tattu R-Line 850mAh 14.8V 95C 45C 1P high voltage battery
Tattu 850mAh 14.8V 75C 4S 1P battery
1 * Black Gold Knight X-Blue Belt 4 Inch Toothpick Cross FPV Quad
1 set * HQ 4025 2-blade paddle 4-inch paddle (2 positive + 2 reverse)
1 set * M2 * 7 screws
Leave a Review
We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.
Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.
Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.
We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.
|Location||*Estimated Shipping Time|
|United States||10-20 Business days|
|Canada, Europe||10-20 Business days|
|Australia, New Zealand||10-30 Business days|
|Central & South America||15-30 Business days|
|Asia||10-20 Business days|
|Africa||15-45 Business days|
Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.
For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.
For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.
If you have any other questions, please contact us and we will do our best to help you out.
All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.
Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.
If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.
If you received the wrong item you can request a refund or a reshipment.
If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.
*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page
If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.
If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.
Please do not send your purchase back to us unless we authorise you to do so.