Main Specifications of DIY Balsa RC Glider Kit DBRGK01:
Fuselage Length: 820mm
Propeller: 8 inch folding propeller
Recommended Devices (Not included):
Radio Control: 2.4Ghz 4 channel or equivalent
Motor: 2212-1400kv Brushless Motor
ESC: 30A Brushless ESC
Servo: 9g servo x 4 pcs
Lipo Battery: 11.1V 1300-1500mAh 20C Lipo Battery
Charger: 3s Balance Charger
Pls note that this is unaseembled glider plane, which comes with following parts:
All Wood Parts of the Plane (Unassembled)
1:1 Drawing of the plane
1 pc 8 inch folding propeller
1 Set of hinges
1 Set of push rods
1 Set of clear canopy
3 pcs of carbon fibre tube for reinforcement
We will send you Photo Manual for Assembly and Attach Cover and Sticker by Email.
We offer you 3 options, pls choose from “Color Options” above according to your needs!
1. Kit without Cover (No Cover, No Motor, No Servo, No ESC, No RC, No Battery, No Charger)
2. Kit + Cover (No Motor, No Servo, No ESC, No RC, No Battery, No Charger)
3. PNP=Kit + Cover + Motor +Servo + ESC (No RC, No Battery, No Charger)
Free Shipping by Air Mail!
This is glider Kit, you need to assemble the parts into fuselage, and wings, and finally install them! We will do our utmost to assist you to enjoy the assembly and flying!
We also offer spare parts for our DIY balsa plane kits.
Just tell us the part no. 🙂
More Nice photo of the Glider Balsa Plane Kit: