F3 Flight Control SP Pro Racing F3 Flight Controller-Cleanflight perfect for Mini 250 210 Quadcopter Better than NAZE/ Flip32

List price:
Price:
You save:
(%)
1862
Color:
Acro version Deluxe version
Quantity:
View cart→
Please wait, we try to get a transaction confirmation as soon as possible.
  • Free Worldwide Shipping
  • 100% Money Back Guarantee
  • 100% Secure Payments

Product Description

Racing F3 Flight Controller (SPRacingF3) was designed to give awesome flight performance

based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely

lightweight form-factor using a next-generation CPU.

The SPRacingF3 gives you all the features you need for the heart of your aircraft, whether you're into FPV racing,

acrobatic flying or aerial photography it's perfect.

Features

• No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED

Strip + Battery Monitoring + Sonar + 8 motors – all at the same time!

• On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without

guesswork ( Deluxe).

• Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster

ARM-Cortex M4 core.

• Stackable design – perfect for integrating with OSDs and power distribution boards.

• 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side

mounted connectors.

• Full support for OneShot ESCs for easy PID tuning and a sharper response.

• Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required

(built-in).

• Dedicated output for programmable LEDs – great for orientation, racing and night flying.

• Dedicated I2C port for connection of OLED display without needing flight battery.

• Battery monitoring ports for voltage and current.

• Sonar support for precision low-altitude hold.

• Buzzer port for audible warnings and notifications.

• Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.

• Symmetrical design for a super tidy wiring.

• Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.

• Barometer mounted on the bottom of the board for easy wind isolation.

• Loop times up to ~2x as fast as previous-generation STM32F1 based boards.

• Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).

• Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.

• Available in Acro and Deluxe versions.

Variations

Acro: Standard model for racing/acro flying.

Deluxe: Additional sensors for altitude and direction.

Software

The SPRacingF3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community

of friendly developers and users. Being open-source means that you too can contribute to the system.

Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and

community. No more out-of-date wiki pages and second-hand information.

Ensure you reference the manual that is appropriate to your firmware version.

History

The hardware was designed by the lead developer of Cleanflight, Dominic Clifton, to be more capable than the

STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots.

Failure to adhere to these warnings will void your warranty and destroy your flight

controller.

• Observe polarity at ALL TIMES. Check and DOUBLE CHECK before applying power.

• POWER OFF before unplugging, plugging in or making any connections.

• Connect only one SOURCE of power to the VCC pins / Do not connect more than

one source of power to two or more of the VCC pins. e.g. If you are using ESCs

with BECs then remove the center RED wire from all but one ESC connector.

• Do not connect GND, VCC or 3.3v to each other (short circuit).

• Do not connect GND, VCC or 3.3v to any inputs or outputs unless specifically stated.

• Do not connect any input or output to any other input or output unless specifically

stated.

• The 3.3v supply is for low-current use only. 100mA MAX.

• Do not allow dirt/dust/glue/etc into the pressure sensor (barometer).

• Keep magnets away from the flight controller.

WARNINGS

GENERAL ADVICE

Follow the advice below for best performance and long-life of your flight controller:

• Apply resin/glue to reinforce JST-SH connectors – helps if you crash your aircraft.

• Using an enclosure/box for the flight-controller is recommended.

• Install open-cell foam under the pressure sensor – sandwich some between the FC

and frame.

• Route motor/battery wires as far away from the compass sensor (magnetometer)

as possible.

• Only install the BOOT jumper pins if you need them.

• Using color coded pin headers is recommended (not supplied), especially for VBAT

headers.

• Do everything you can to prevent vibrations reaching the accelerometer/gyro sensor.

e.g. balance props, motors and secure everything

The SPRacingF3 gives you all the features you need for the heart of your aircraft, whether you're into FPV racing, acrobatic flying or aerial photography it's perfect.

Deluxe: Additional sensors for altitude and direction.

The SPRacingF3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source means that you too can contribute to the system.

Specs:

* 36x36mm board with 30.5mm mounting holes.

* ~5 grams.

* STM32F3 CPU.

* High-Capacity Flash (Acro and Deluxe)

* MPU6050 accelerometer/gyro

* MS5611 barometer (Deluxe only)

* HMC5883 compass (Deluxe only)

* MicroUSB socket.

* 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)

* 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)

* 8x 3pin though-holes for pin headers for ESC/Servo connections.

* 2x 4pin though-holes for pin headers for 2x serial ports.

* 2x 2pin though-holes for pin headers for battery voltage and buzzer.

Package Including:

1 * F3 Flight Controller Board W/ Shell ( There are two kinds of case, we will send it at random )

Deluxe version (10 DOF) is the version with compass and brano

ACRO (6 DOF) is the version without compass and brano

Reviews (0)

No reviews yet.
Leave a Review

Item Specifics

Use: 
 Vehicles & Remote Control Toys
Brand Name: 
 uuustore
Material: 
 EVA
RC Parts & Accs: 
 Radio Systems

SHIPPING AND DELIVERY

We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:
Location *Estimated Shipping Time
United States 10-20 Business days
Canada, Europe 10-20 Business days
Australia, New Zealand 10-30 Business days
Central & South America 15-30 Business days
Asia 10-20 Business days
Africa 15-45 Business days
*This doesn’t include our 2-5 day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.

My tracking says “no information available at the moment”.

For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

REFUNDS & RETURNS POLICY

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.

Refunds

Your satisfaction is our #1 priority. Therefore, if you’d like a refund you can request one no matter the reason.

If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.

If you received the wrong item you can request a refund or a reshipment.

If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.

  • Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
  • Your order did not arrive due to exceptional circumstances outside the control of SAJAKS Favorites (i.e. not cleared by customs, delayed by a natural disaster).
  • Other exceptional circumstances outside the control of www.sajaksfavorites.com

*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.

Exchanges

If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorise you to do so.

Shopping cart

×