GEPRC Frame 5 inch 224mm Mark4 HD5 Freestyle Quadcopter Frame for DJI Digital FPV System for DJI FPV Air Unit w/ Antenna Holder
This ” GEPRC Mark4 HD5 ” 224mm frame was specially designed for the DJI Digital FPV system.
Full carbon fiber airframe, suited for a 5-inch propeller power system and flight controllers.
With 3D printed base holder, helps to protect the DJI FPV Air Unit and antenna in the event of a crash, also with separate parts for maintenance and replacement.
With 30.5*30.5mm and 20*20mm flight control holes , stack can fit in the center or the rear.
Lower center gravity design, the wind resistance is smaller, reduce air resistance, easy to maintain.
YFS screws, 12.9 hardness, hard and non-slip.
No propeller and motor in the lens view or video recording! which will be the perfect FPV experience!
Type: Quadcopter freestyle frame
Item name:MARK4 HD5
Frame type: H type
Frame wheelbase: 224mm
Weight: about 121g (including 3D printed parts)
Mounting Holes: 30.5×30.5mm/20x20mm
Arms thickness : 5mm
Side plate thickness: 2.5mm
Top plate thickness: 2.5mm
Bottom plate thickness: 2.5mm
Protect plate thickness: 2mm
8 x M3*25mm Aluminum column silver gray
4 x M3*18mm Aluminum column silver gray
8 x M3*8 YFS Flat Screw
4 x M3*10 YFS Flat Screw
2 x M3*10 YFS Button Screw
2 x M3*12 YFS Button Screw
4 x M3*14 YFS Button Screw
4 x M3*20 YFS Button Screw
4 x M3 Nylon nut
4 x Red silicone shock absorber
2 x 20*220 LiPo fixed strap
2 x 15*250 LiPo fixed strap
5 x Nylon cable tie
4 x Shock-absorbing EVA pad
Recommend parts (not include):
Flight Controller: RF/Kiss/F3/F4/F7
LiPo: 4S 1500mAh ~ 6S 1300mAh
FPV: DJI FPV Air Unit
DO NOT touch the air unit before it cools down.
DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode.
4 x 5mm 5inch arms plate
2 x 2.5mm side plate
1 x 2.5mm top plate
1 x 2.5mm bottom plate
2 x 2mm bumpers plate
2 x 2mm reinforce plate
1 x LiPo silicone pad
1 x DJI FPV Air Unit mount adapter
1 x Antenna mount adapter
1 x RX antenna mount adapter
Notes by OK RC:
Mark4 HD5 frame kit only , other parts not included.
3D printing material is slightly rough, please don't mind.
There may be some deviation due to manual measurement.
The colors deviation might differ due to different monitor settings, please kindly understand.
“OK RC” has only one store, no branch, other pictures and descriptions of the same store as us , are competitors copying us, we are more professional than them !
We provide you with the best product and service. If you have any problem, please let us know, and we will solve the problem ASAP.
Thank you so much, nice day !