This is JX PDI-6221MG with high quality core motor.
It is suitable for 1/10 1/8 rc car/HHK big airplane.20.32kg large torque.20.32kg·cm @6V
and High Speed 0.16sec/60 @6V can give a high performance.
The aluminium case can enhance the heat dissipation and ensure that servo motor can work well.Features:
20.32kg large torque.20.32kg·cm @6V
High Speed 0.16sec/60 @6V
4.8V-6V High-Voltage
Ideal choice for 1/10 1/8 RC car/HHK Big airplane
Full metal gear. its better for accuracy, service life has been greatly increased
Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work wellSpecifications:
Brand: JX
Signal: Digital
Dead band: 2μs
Bearing: 2BB
Working frequence: 1520μs / 330hz
Connector wire length:JR 260mm
Operating Speed (4.8V): 0.18 sec / 60°
Operating Speed (6V): 0.16 sec / 60°
Stall Torque (4.8V): 17.25 kg.cm
Stall Torque (6V): 20.32 kg.cm
Dimensions: 40.5 * 40 * 20.2mm / 1.59 * 1.57 * 0.80 in
Weight: 62 g
Package Information:
Package size: 6.4 * 5 * 4cm / 2.5 * 1.9 * 1.6in
Package weight: 80g / 2.82oz
PDI-6221MG-180 degree detailed specifications:
Dead zone: 2μs
Pulse width range: 500μs-2500μs (suitable for single-chip control board)
Angle range: actual angle 172 ± 2 °
Motor: iron core
Speed (4.8V): 0.18 sec/85°
Speed (6V): 0.16 sec/85°
Torque (4.8V): 17.25 kg.cm (239.55oz/in)
Torque (6V): 20.32 kg-cm (281.89 oz/in)
Size: 40.5X20.2X38mm / (standard size)
Weight: 62 g (2.18oz)
Cable: JR 265 mm (10.43in)
Bearing: 2BB
Output teeth: 25T (Futaba universal)
Includes steering gear kit, one-word, half-section, cross, *-type, disc, related screws
At present, this steering gear belongs to the user DIY products, and the control procedures are various, so we do not make the warranty for the time being, there is no reason to return the service, if there is any problem, please contact us within 24 hours after signing (the product quality is returned) Before you buy, clear it before you buy it.
PDI-6221MG-360 degree continuous transfer detailed specifications:
Please copy the video address to the new page to open: //v.youku.com/v_show/id_XNzU1Njg5OTI0.html
Dead zone: 2μs
Maximum pulse width: 500-2500us, pulse width is stopped at 1500us (suitable for remote control, MCU control board)
Angle range: 360° continuous turn
Motor: iron core
Speed (4.8V): 53 rpm
Speed (6V): 65 rpm
Size: 40.5X20.2X38mm / (standard size)
Weight: 62 g (2.18oz)
Cable: JR 265 mm (10.43in)
Bearing: 2BB
Output teeth: 25T (Futaba universal)
Includes steering gear kit, one-word, half-section, cross, *-type, disc, related screws
At present, this adaptation pulse width range is 500us-2500us (0.5-2.5ms), and it can also be used in other ranges of pulse width, and the midpoint is 1500us (1.5ms). This is equivalent to a gearbox, suitable for DIY cars, etc. Consistent with standard steering gear,
For example, DIY car, 1500us is stop or drag brake, outside 1500us is forward or backward
PDI-6221MG-360: 1500us-500us is positive, 1500us-2500us is reverse,
PDI-6221MG+360: 1500us-500us is reverse, 1500us-2500us is positive,
At present, this steering gear belongs to the user DIY products, and the control procedures are various, so we do not make the warranty for the time being, there is no reason to return the service, if there is any problem, please contact us within 24 hours after signing (the product quality is returned) Before you buy, clear it before you buy it.
![]()
![]()
![]()
![]()
![]()
![]()