This is the newest version, add auto sweep and matc frequency,Snow screen 0.1s Delay.
I believe that we have been on the issue of digital map simulation has been tangled, then we will tell a lot of this product, the original simulation we have just begun!
Original 150 point full frequency band scan 1500 times to calculate the intensity of RSSI, locking the most accurate frequency! The frequency of the traditional 3240 channel transmitter will tend to drift from 5m to 10m, the traditional receiver of the 32 channel, which is only 10m of precision, the maximum distance between the 10m can be a difference of 5 times
We increase the channel to 150, the accuracy is 2m, 2m is also the highest! 2m basic can lock ninety-five percent signal points, which is the highest accuracy of the chip.. The distance between individuals can be controlled at ten percent
With a high accuracy, then the abstract radio, how can we show to everyone, so we made 2 months, in the case of no increase in power consumption and cost of a OSD waveform to do the image interface!! This thing is the mobile spectrum instrument, you can detect the quality of the antenna, the transmitter to do horizontal comparison, the factory's electromagnetic environment testing, aircraft, etc…
Add new features to the 2 generation:
150 frequency points + automatic sweep frequency + snow display +…… more simple and beautiful appearance……
Question 1: how far can you receive this receiver?
A: it's just a receiver. It's about a lot of factors! 200MW fly more than 10 kilometers, 2W fly hundreds of meters are also a lot of people in. We don't do this! This is just a receiver just use the phone to see it, not because of the use of mobile phones to reduce the increase
2 receiver how many MW?
A: the receiver doesn't have a radio frequency power. It's like asking how loud your ears are. This is the ear…
Can be equipped with our shop strongly recommended 600MW transmitter. Can also be equipped with any one of the 5.8G video transmitter on the market.
Question 3: integration OSD what
Answer: OSD is not on the sky!
Sail model of affection and dedication, support any flight control!!!! Any aircraft!! Please do not ask not to support Xinjiang flight control so low's problem…. This is a 5.8G receiver, the traditional is transferred to the screen, we are passed to the phone, and at the same time can be passed to the screen.. Simplifying wiring and structure by using mobile phone power supply!! Coupled with powerful pocket FPV this app, embodies the VR flight!!!
PS is currently testing Qualcomm and Samsung CPU mobile phone to support HUAWEI and MTK CPU mobile phone in addition to individual high-end models of all the basic does not support, if you do not know what mobile phone CPU also don't do, I won't tell you what is the mobile phone cpu..
Warm reminder: more than ninety percent of HUAWEI mobile phone does not support, MTK CPU does not support, the actual phone or tablet also need to be tested in person to identify!! The following chart reflects the customer, only for reference. Accuracy ninety percent.
Oppo and step by step some models need to set up in the OTG function to open the link.
Support for all 5.8G image transmission!!
Support AV output, there are reserved solder.
How to detect whether the phone supports USV receiver:
FPV software video:
USV2.1 latest version of the tutorial:
Detection of mobile phone APP software download:
FPV APP download software
LST-S2 5.8G 800TVL HD Micro CMOS FPV Camera 150-Degree Angle Of View 3.6g Ultralight VTX 25MW Transmitter NTSC / PAL Switchable
● Super light, only 3.6g including 800TVL HD camera, VTX and antenna
● Ultra wide angle lens, 150-degree FOV, 170-degree DFOV
● Five bands, 40 channels in total, with RaceBand ( Band R )
Sensor: 1/4 inch CMOS
Lens: M7 800TVL HD
Angle of view: 150-degree FOV, 170-degree DFOV
Power consumption: 380mA at 3.7V
Power supply: 3.6 – 5.5V
TV system: NTSC / PAL switchable
Output impedance: 75 ohm
Output signal strength: 23 – 24dBm
Output power: 25mW
Number of channels: 40
Audio carrier: 6.5MHz
FPV Mini Camera
Dimension and Weight
Product size (L x W x H)
1.50 x 1.50 x 7.00 cm / 0.59 x 0.59 x 2.76 inches
Package size (L x W x H)
7.20 x 7.20 x 3.50 cm / 2.83 x 2.83 x 1.38 inches
1 x AIO FPV Camera, 1 x Cable, 1 x English Manual
5.8G 25mW Transmitter With 1000TVL Camera and Antenna
Sensor : 1/3″ COMS
Power : Connect to 5V Stable power supply (5V output in control board or 5V BEC,or it will have interfere)
Lens Mirror Diameter:2.9mm
Support video format :PAL
Output Impedance: 50 Ohm
Output signal strength: 13±1dbmdBm
Output Power: 25mW
Wireless Channel: 48CH
Operating voltage: 5v
Frequency : 5 BAND 48CH 5645 ~ 5945 MHz
Weight :9.9g (including the antenna)
Size : 23*20*13.8mm
1. Micro Size and Light weight
2. Easy installation for racing drone
1 * 5.8G 25mW Transmitter With 800TVL/ 1000TVL Camera and Antenna (send by your choice)
1 * 5.8G FPV Receiver
1 * OTG Cable(5V connect Phone)
Note: please kindly use the BEC or flight controller stable power supply to transmitter , otherwise will be instability .