Original Xiaoda Smart Sensor Faucet Infrared Sensor Automatic Water Saver Tap Anti-overflow Kitchen Inductive Faucet
Note: This product comes from Xiaomi ecological chain, so there is not any MI logo on it.
Product: Xiaoda Automatic Water Saving Switch
Power Consumption: ≤0.2mW
Hydraulic Pressure: 0.05-0.8MPa
Working Water Temperature: ≤75°C
Sensing Range: Side sensing 0-5cm / bottom sensing 0-10cm
Water Consumption: Water use efficiency
Waterproof Rating: IPX6
Product Weight: Approx. 105g
Product Size: Approx. 6.0*4.9*3.4cm/2.36*1.93*1.34in
Package Weight: Approx. 260g
Package Size: Approx. 19*12.6*3.7cm/7.5* 4.96 *1.46in
1. Water flow out by sensing, no need transfer stains or touch the faucet, just reach out your hand.
2. Saving water effectively with two sensing modes (bottom and side sensor)
3. Instant mode: bottom sensor (0-10cm sensing distance) for fast water flowing, auto-stopping after 20-second water flowing out.
4. Continuous mode: side sensor (0-5cm sensing distance) makes the water flow out for 3 minutes.
5. Optimized infrared sensing combined with MCU algorithm and air injection technology, energy-saving and eco-friendly design for smart life.
6. Small size, easy installation, 6 kinds adapters for common mainstream faucets
7. Use USB cable to charge, 3-hour charging time for up to 6 months use (theoretically)
8. 6 sets of adapters (M20/M22/G1/2 internal & M20/M22/M24 external adapters)
Water Saving Device x 1
Wrench x 1
Seal Ring x 3
Mounting Adapter x 6
Instruction manual x 1
Automatic Water Saver Tap
Intelligent sensor: Sensor water out/ Save water/ East to disassemble/ Long battery life/ Overflow protection
Long Endurance Time
With the way USB charging, the full charge time is about 3 hours, and it can be used for about 6 months. When the battery is low, it lights up to remind you to charge.
Air injection technique
Air injection technology increases the proportion of air in the process of water out, making the water spray soft and delicate, with more scouring power. At the same time, reduce the time of not being used effectively, so that the water flow rate reached 0.07L/S Water saving and environmental protection.
Convenient to Install
Retain the original faucet, with the supporting tools can easily complete the installation process.
When the induced object enters the bottom sensing area(effective distance is within 10cm), the water will flow out. When the induced object leaves the bottom sensing area, the water will flow stop. When the water flowing time than 20 seconds, the water will automatic water stop.
When the induced object enters the side sensing area(effective distance is within 5 cm), the water will flow out for 3 minutes. Even if the induced object leaves, the water will flow out. In the process of flow out, If the induced object enters the side sensing area again, the water flow will stop.
Built-in storage capacitance, it can timely close the valve to prevent water from flowing out even if the device is power off.
Two groups of induction area, two water outlet mode, 0.25-second quick induction, intelligent and convenient.
Innovative technology design, MCU algorithm and pulse interval sampling were used to optimize infrared induction which reduced the energy consumption of the product and ensure the consistency and stability of the product in complex environments.
Simple design style, suitable to a variety of home style.
6pcs Mounting adapters
Suitable for mainstream faucets in the market